The flexible BOY XXS proves its advantages especially in the production of prototypes, in small series, e.g. in the production of spare parts and in the manufacture of micro to small parts.

The BOY XS E is the successor model to the highly successful BOY XS. The differences to the predecessor model are the very energy-efficient servo pump drive, the ALPHA 6 control with its revised design and the significantly improved accessibility of the machine components.

The BOY XS is a development from BOY – an injection molding machine designed with well-proven technology and all the merits of our larger machines.

The basic concept of the BOY XS V is identical to the BOY XS, except the injection and clamping units are arranged vertically.

The BOY 22 and preceding models were the beginning of BOY‘s success story. Since 1968, more than 25,000 machines of this series have been operating worldwide in continuously improved and more efficient versions.

The BOY 25 E is based on a well proven design. Since 1968, more than 25,000 machines of this series have been delivered.

The BOY 25 E VV insert molding machine is the replacement of the BOY 22 A VV with further optimizations and modern technology.

The BOY 35 E is a four-tie bar, fully hydraulic reciprocating screw injection molding machine with two-platen clamping unit and swivel-out injection unit.

The basic concept of the 35 E VV is quiet similar to the BOY 35 E horizontal injection molding machine - merely the injection and clamping unit were arranged vertically by a 90° rotation.

As entry-level model with 55 US tons clamping force, the BOY 50 E includes a multitude of functions already in standard execution.

With its appealing design, the BOY 60 E is an optical highlight. But it is more than just optics which convinces the experts, namely its technical and operational values and its orientation towards cost-saving.

The largest BOY insert moulding machine now has a clamping force of 600 KN (performance increase of 50 KN more).

The BOY 80 E provides 88 US tons clamping force. Given the easy handling of the machine, the users of the BOY 80 E enjoy maximum flexibility.

Some more of everything! Greater daylight between tie bars and larger platen distances as well as a clamping force of 110 US tons characterize the BOY 100 E.

Significantly stronger, larger and more powerful, were the requirements for the development of BOY 125 E. 137.5 US tons clamping force characterizes now the new machine upper limit at BOY.

The injection unit for the 2nd component is based of the ultra compact BOY XS. It is equipped with its own hydraulic drive and control.

The injection unit for the 2nd component is equipped with its own hydraulic drive and control.